Every Rayson product is built for a job. Filter by the surface you are coating, the conditions it faces, or the industry you work in — or browse by product family below.
Showing 24 products
Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.
View product
Rayson PrimeBond E25 is a two-component, medium-viscosity, solvent-free epoxy bonding primer for dry or damp substrates — formulated to wet out and anchor to highly absorbent concrete, screed, asphalt and prepared metal.
View product
Rayson PrimeBond S30 is a two-part, low-viscosity, solvent-based epoxy primer that penetrates and seals prepared concrete, pavements and mineral substrates before coating.
View product
Rayson PrimeBond W10 is a one-component, water-based acrylic primer, sealer and bonding agent for smooth concrete and mineral substrates, applied ahead of Rayson UraForce water-based topcoats.
View product
Rayson FloorGuard R50 is a two-component, solvent-free high-solids epoxy floor coating that cures to a smooth gloss — or a slip-resistant finish when broadcast with aggregate — for concrete and screed under normal to medium-heavy wear.
View product
Rayson HydroShield WE40 is a two-component, water-based epoxy used as a self-priming primer-and-topcoat system on concrete, screed, asphalt and metal — including damp surfaces.
View product
Rayson HydroShield WE45 is a two-component, water-based epoxy primer-and-topcoat system for concrete, screed, asphalt and metal — covering duties from warehouse floors to rubbish chute coatings.
View product
Rayson LevelShield SL120 is a solvent-free, two-component, self-smoothing epoxy floor system that delivers a seamless wearing surface with medium to heavy chemical resistance and high mechanical strength.
View product
Rayson StaticGuard CX90 is a two-component, solvent-free conductive epoxy flooring that gives ESD-protected areas a self-smoothing, permanently conductive, chemically resistant wearing surface.
View product
Rayson PurScreed PC70 is a four-part, water-based polyurethane-cement self-smoothing screed installed at 1.5–3 mm for medium to heavy-duty industrial floors with high chemical resistance.
View product
Rayson UraForce SB72 is a two-component, solvent-based polyurethane floor finish that holds its colour and high gloss under strong UV while resisting abrasion and a broad range of chemicals.
View product
Rayson UraForce SB65 is a two-component, solvent-based aliphatic polyurethane clear topcoat with excellent abrasion resistance, non-yellowing behaviour and outstanding weather durability for concrete, metal and stone.
View product
Rayson UraForce WB58 is a two-component, water-based aliphatic polyurethane dispersion topcoat, crosslinked with a PUR hardener, for abrasion-resistant coloured finishes on concrete, metal and mineral surfaces.
View product
Rayson UraForce WB60 is a two-component, water-based aliphatic polyurethane dispersion clear coat, crosslinked with a solvent-free hardener, giving a non-yellowing, abrasion-resistant finish in gloss, satin or matt.
View product
Rayson UraForce HY15 is a single-component, water-based hybrid urethane — a self-crosslinking acrylic-copolymer-enhanced polyurethane — that roller-coats concrete and mineral surfaces with a fast-drying, stain-resistant, anti-slip finish.
View product
Rayson UraForce WB52 is a two-component, water-based aliphatic urethane floor topcoat — low-VOC, low-odour and UV-resistant — that can be combined with broadcast aggregate for an anti-slip finish.
View product
Rayson GripSafe AP12 is a one-pack, self-crosslinking acrylic primer filler loaded with 0.5–1.5 mm silicate quartz aggregate that builds an anti-slip texture directly onto concrete and asphalt.
View product
Rayson MortarBond EM90 is a three-pack, solvent-free epoxy mortar — resin, hardener and graded aggregate — that reinstates concrete floors with a non-shrink, highly abrasion-resistant repair.
View product
Rayson PatchBond TX80 is a two-component, solvent-free thixotropic epoxy adhesive and repair compound with exceptional sag resistance that bonds and fills on vertical, overhead and even mat-damp concrete surfaces.
View product
Rayson CourtFlex AC25 is a single-component, water-based, self-crosslinking acrylic co-polymer coating for sports courts and decorative concrete and masonry surfaces, forming a stain-resistant, easy-to-clean film.
View product
Rayson SealForce RC40 is a two-component, cold-applied aliphatic polyurea waterproofing membrane for exposed roofs — roller-, brush- or spray-applied, UV-stable and walkable, with certified cool-roof reflectance.
View product
Rayson SealForce RC30 is a two-component, roller-applied polyurea-based liquid waterproofing membrane — highly elastic and hydrophobic, bonding strongly to concrete, tile, metal and asphalt for wet areas, roofs and car parks.
View product
Rayson SealForce SP200 is a hot spray-applied, 100% solids, rapid-curing pure polyurea membrane that forms a seamless, chemically resistant waterproof and protective lining on concrete and steel.
View product
Rayson SealForce SP210 is a hot spray-applied, 100% solids pure polyurea membrane that forms a seamless, potable-grade waterproof lining on concrete and steel tanks, reservoirs and containment structures.
View productNo products match those filters. Try removing one, or ask our technical team — we can recommend a system for unusual conditions.
Primers & bonding coats
Epoxy and specialist primers that anchor every Rayson system to the substrate — the first step of a coating that lasts.
Epoxy floor coatings
Roller- and squeegee-applied epoxy floor coatings for clean, hard-wearing industrial and commercial floors.
Self-levelling floor systems
Self-smoothing epoxy systems that deliver seamless, level floors for demanding production and clean environments.
Polyurethane finishes
Polyurethane and hybrid urethane finishes engineered for UV stability, flexibility and abrasion resistance.
Polyurethane-cement systems
Heavy-duty polyurethane-cement screeds for food and beverage, chemical processing and thermal-shock environments.
Water-based & low-odour systems
Water-based epoxy coatings and primers for occupied buildings and projects where low odour matters.
Anti-slip systems
Anti-slip primers, fillers and textured finishes that keep ramps, wet areas and walkways safe underfoot.
Static-control flooring
Conductive and static-dissipative flooring systems for electronics manufacturing and sensitive environments.
Sports & court coatings
Acrylic sports-surface coatings for courts and recreational areas — colour-stable, consistent bounce, outdoor-ready.
Repair mortars & compounds
Epoxy repair mortars and thixotropic compounds for patching, coving and reinstating damaged concrete before coating.
Polyurea waterproofing membranes
Seamless polyurea waterproofing membranes — cold roller-applied and hot spray-applied — for roofs, wet areas, tanks and containment structures.
Tell us your surface, area and timeline — our Singapore technical team will recommend a practical system and price it fast.
Rayson assistant
Answers from Rayson's own product information
Guidance only — confirm specifications with the Rayson technical team.