Rayson UraForce WB60 is a two-component, water-based aliphatic polyurethane dispersion clear coat, crosslinked with a solvent-free hardener, giving a non-yellowing, abrasion-resistant finish in gloss, satin or matt.
Best for clear protective finishes in occupied buildings — sealing and dustproofing floors and walls with low odour and no yellowing.
UraForce WB60 is the water-based clear coat of the UraForce family. The aliphatic polyurethane dispersion crosslinks with a solvent-free hardener into a non-yellowing film with excellent abrasion resistance, low dirt pick-up and good water repellence — pencil hardness above H and gloss of 85 at 60° in the gloss grade.
Low VOC and low odour, it is the clear finish to reach for in occupied offices, schools and retail interiors where solvent products are excluded. It adheres to mechanically prepared concrete, metal, stone and limestone, and doubles as a hygienic washable coating for walls.
Available in gloss, satin and matt, it mixes 9:1 by weight with a working pot life of about 2 hours and is applied by brush or roller in a minimum of two coats.
A finish is the top coat. It provides the final appearance, cleanability and resistance to traffic, chemicals or UV.
The figures below are a guide for planning. Site conditions and workmanship affect results — confirm the details for your project with our technical team.
| Coverage | Refer to TDS / contact technical team |
|---|---|
| Mixing | Two pre-weighed parts, mix ratio 9:1 by weight; stir parts separately, combine and mix with a slow-speed drill and paddle for 1–2 minutes; pot life approximately 2 hours |
| Drying & curing | Surface dry 6 hours at 25 °C |
| Pack sizes | 18 kg pail (base) + 2 kg pail (hardener) |
It is low VOC and low odour, which makes occupied-building application practical with normal segregation of the work area. Verify site rules and allow proper cure before reopening.
Both are non-yellowing aliphatic PU clear coats. WB60 is water-based and low odour for interiors and occupied buildings; SB65 is solvent-based with outstanding exterior weather durability.
Gloss, satin and matt — the gloss grade measures around 85 at 60°.
A minimum of two, edges stripe-coated by brush before rolling.
Check coverage with our technical team before quantifying.
Rayson UraForce WB58 is a two-component, water-based aliphatic polyurethane dispersion topcoat, crosslinked with a PUR hardener, for abrasion-resistant coloured finishes on concrete, metal and mineral surfaces.
View product
Rayson UraForce SB65 is a two-component, solvent-based aliphatic polyurethane clear topcoat with excellent abrasion resistance, non-yellowing behaviour and outstanding weather durability for concrete, metal and stone.
View product
Rayson HydroShield WE45 is a two-component, water-based epoxy primer-and-topcoat system for concrete, screed, asphalt and metal — covering duties from warehouse floors to rubbish chute coatings.
View product
Rayson PrimeBond W10 is a one-component, water-based acrylic primer, sealer and bonding agent for smooth concrete and mineral substrates, applied ahead of Rayson UraForce water-based topcoats.
View productTell us your surface, area and timeline — our Singapore technical team will recommend a practical system and price it fast.
Rayson assistant
Answers from Rayson's own product information
Guidance only — confirm specifications with the Rayson technical team.