Coverage calculator

6–8 m² per kg per coat, varying with substrate condition and porosity

6–8 m² per kg per coat, varying with substrate condition and porosity

5–6 m² per litre per coat; minimum 2 coats on normal or dense concrete — varies with substrate porosity

5–10 m² per litre depending on substrate condition

0.3–0.5 kg/m² per coat, applied in 2 coats; varies with substrate condition

6–8 m² per kg per coat, varying with substrate condition

6–8 m² per kg per coat, varying with prepared substrate condition

Approximately 1.6–2.0 kg/m² as a self-smoothing wearing coat, subject to filling grade, porosity, level variation and wastage

Minimum 2.25 kg binder per m² per coat at approximately 1.5 mm (optionally +0.25 kg quartz sand); approximately 5–8 m²/L at 75 µm DFT for thin coats; maximum ~2.5 kg/m² binder plus filler at 1.5 mm

1.8 kg/m² per mm of thickness (varies with substrate condition)

Material consumption 0.10 L/m² per coat

Theoretical 5–8 m² per litre, subject to substrate porosity and application conditions

Approximately up to 1.90 kg/m² per mm of thickness (theoretical, subject to conditions and porosity)

1–1.2 kg/m² total over two layers on cementitious surfaces

1.5–1.8 kg/m² total (typically two coats at 0.75–0.9 kg/m² each)

1.0–3.0 litres/m² depending on specification; normal minimum 1.5 litres/m² (1.5 mm DFT external, 2.5–3.0 mm for water-retaining structures)

1.0 litre/m² per mm dry film; typically 1.5 mm wet film in one coat