Rayson technical specialists inspecting a high-performance floor in a modern industrial facility
Industry

Manufacturing & Warehousing

Factories and warehouses need floors that take forklift traffic, racking loads and abrasion while staying easy to clean and mark out. Rayson epoxy coating, self-levelling and screed systems keep production and logistics floors working.

Common surface problems

  • Abrasion and dusting under forklift and pallet-truck traffic
  • Joint edge breakdown in trafficked aisles
  • Oil and coolant staining production zones
  • Faded or missing demarcation lines

Operating conditions

  • MHE traffic around the clock in busy DCs
  • Racking point loads and drag loads
  • Mixed wet and dry process areas
  • Limited shutdown windows for refurbishment

Suitable Rayson systems

Rayson PrimeBond — Primers & bonding coats

Rayson PrimeBond E20 — Primers & bonding coats
PrimeBond epoxy

Rayson PrimeBond E20

Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.

  • Surfaces: concrete, cement screed
  • Role: primer
View product
Rayson PrimeBond E25 — Primers & bonding coats
PrimeBond epoxy

Rayson PrimeBond E25

Rayson PrimeBond E25 is a two-component, medium-viscosity, solvent-free epoxy bonding primer for dry or damp substrates — formulated to wet out and anchor to highly absorbent concrete, screed, asphalt and prepared metal.

  • Surfaces: concrete, cement screed
  • Role: primer
View product
Rayson PrimeBond S30 — Primers & bonding coats
PrimeBond epoxy

Rayson PrimeBond S30

Rayson PrimeBond S30 is a two-part, low-viscosity, solvent-based epoxy primer that penetrates and seals prepared concrete, pavements and mineral substrates before coating.

  • Surfaces: concrete, cement screed
  • Role: primer
View product

Rayson FloorGuard — Epoxy floor coatings

Rayson FloorGuard R50 — Epoxy floor coatings
FloorGuard epoxy

Rayson FloorGuard R50

Rayson FloorGuard R50 is a two-component, solvent-free high-solids epoxy floor coating that cures to a smooth gloss — or a slip-resistant finish when broadcast with aggregate — for concrete and screed under normal to medium-heavy wear.

  • Surfaces: concrete, cement screed
  • Role: body coat
View product

Rayson HydroShield — Water-based & low-odour systems

Rayson HydroShield WE40 — Water-based & low-odour systems
HydroShield water based epoxy

Rayson HydroShield WE40

Rayson HydroShield WE40 is a two-component, water-based epoxy used as a self-priming primer-and-topcoat system on concrete, screed, asphalt and metal — including damp surfaces.

  • Surfaces: concrete, cement screed
  • Role: standalone
View product
Rayson HydroShield WE45 — Water-based & low-odour systems
HydroShield water based epoxy

Rayson HydroShield WE45

Rayson HydroShield WE45 is a two-component, water-based epoxy primer-and-topcoat system for concrete, screed, asphalt and metal — covering duties from warehouse floors to rubbish chute coatings.

  • Surfaces: concrete, cement screed
  • Role: standalone
View product

Rayson LevelShield — Self-levelling floor systems

Rayson LevelShield SL120 — Self-levelling floor systems
LevelShield epoxy

Rayson LevelShield SL120

Rayson LevelShield SL120 is a solvent-free, two-component, self-smoothing epoxy floor system that delivers a seamless wearing surface with medium to heavy chemical resistance and high mechanical strength.

  • Surfaces: concrete
  • Role: body coat
View product

Rayson PurScreed — Polyurethane-cement systems

Rayson PurScreed PC70 — Polyurethane-cement systems
PurScreed pu cement

Rayson PurScreed PC70

Rayson PurScreed PC70 is a four-part, water-based polyurethane-cement self-smoothing screed installed at 1.5–3 mm for medium to heavy-duty industrial floors with high chemical resistance.

  • Surfaces: concrete
  • Role: body coat
View product

Rayson UraForce — Polyurethane finishes

Rayson UraForce SB72 — Polyurethane finishes
UraForce polyurethane

Rayson UraForce SB72

Rayson UraForce SB72 is a two-component, solvent-based polyurethane floor finish that holds its colour and high gloss under strong UV while resisting abrasion and a broad range of chemicals.

  • Surfaces: concrete
  • Role: finish
View product
Rayson UraForce SB65 — Polyurethane finishes
UraForce polyurethane

Rayson UraForce SB65

Rayson UraForce SB65 is a two-component, solvent-based aliphatic polyurethane clear topcoat with excellent abrasion resistance, non-yellowing behaviour and outstanding weather durability for concrete, metal and stone.

  • Surfaces: concrete, walls
  • Role: finish
View product

Rayson PatchBond — Repair mortars & compounds

Rayson MortarBond EM90 — Repair mortars & compounds
PatchBond epoxy

Rayson MortarBond EM90

Rayson MortarBond EM90 is a three-pack, solvent-free epoxy mortar — resin, hardener and graded aggregate — that reinstates concrete floors with a non-shrink, highly abrasion-resistant repair.

  • Surfaces: concrete
  • Role: body coat
View product
Rayson PatchBond TX80 — Repair mortars & compounds
PatchBond epoxy

Rayson PatchBond TX80

Rayson PatchBond TX80 is a two-component, solvent-free thixotropic epoxy adhesive and repair compound with exceptional sag resistance that bonds and fills on vertical, overhead and even mat-damp concrete surfaces.

  • Surfaces: concrete, walls
  • Role: standalone
View product

Rayson SealForce — Polyurea waterproofing membranes

Rayson SealForce RC40 — Polyurea waterproofing membranes
SealForce polyurea

Rayson SealForce RC40

Rayson SealForce RC40 is a two-component, cold-applied aliphatic polyurea waterproofing membrane for exposed roofs — roller-, brush- or spray-applied, UV-stable and walkable, with certified cool-roof reflectance.

  • Surfaces: roofs, concrete, cement screed, exposed structures
  • Role: standalone
View product
Rayson SealForce RC30 — Polyurea waterproofing membranes
SealForce polyurea

Rayson SealForce RC30

Rayson SealForce RC30 is a two-component, roller-applied polyurea-based liquid waterproofing membrane — highly elastic and hydrophobic, bonding strongly to concrete, tile, metal and asphalt for wet areas, roofs and car parks.

  • Surfaces: concrete, cement screed, wet areas, roofs
  • Role: standalone
View product
Rayson SealForce SP200 — Polyurea waterproofing membranes
SealForce polyurea

Rayson SealForce SP200

Rayson SealForce SP200 is a hot spray-applied, 100% solids, rapid-curing pure polyurea membrane that forms a seamless, chemically resistant waterproof and protective lining on concrete and steel.

  • Surfaces: concrete, exposed structures, wet areas
  • Role: standalone
View product
Rayson SealForce SP210 — Polyurea waterproofing membranes
SealForce polyurea

Rayson SealForce SP210

Rayson SealForce SP210 is a hot spray-applied, 100% solids pure polyurea membrane that forms a seamless, potable-grade waterproof lining on concrete and steel tanks, reservoirs and containment structures.

  • Surfaces: concrete, exposed structures, wet areas
  • Role: standalone
View product

Surface preparation considerations

  • Assess slab condition and joints before system selection
  • Diamond-grind or shot-blast to a sound, open surface
  • Phase work area by area to keep operations running

Maintenance

  • Scrub-dry cleaning matched to floor texture
  • Inspect aisles and transfer points every six months
  • Renew line marking before it disappears

A recommended combination

Standard epoxy floor system

  1. Mechanically prepare and vacuum the substrate
  2. Prime with Rayson PrimeBond E20
  3. Apply Rayson LevelShield SL120 self-levelling body coat

This is a typical build-up. The exact system depends on your conditions — confirm the specification with our technical team.

Technical documents

Technical data sheets for the products above are in the TDS library. For a specification tailored to your project, contact our technical team.

When to contact technical support

Get in touch early if:

  • Heavy MHE traffic or racking point loads need a matched build-up
  • The facility must stay operational during phased works
  • Joints and slab defects are widespread
Contact technical support

Not sure which system fits your project?

Tell us your surface, area and timeline — our Singapore technical team will recommend a practical system and price it fast.