Industry

Aerospace Facilities

Aerospace hangars and MRO facilities need seamless, hard-wearing floors that resist hydraulic fluids, take point loads from jacking and tooling, and stay easy to inspect and clean. Rayson supplies epoxy primer, self-levelling and coating systems suited to hangar and workshop floors.

Common surface problems

Hydraulic fluid, fuel and lubricant spills attacking unprotected concrete
Dusting concrete contaminating clean work zones
Point loading from aircraft jacks, docking and tooling
Joint and surface damage from towing and GSE traffic

Operating conditions

Large open floor plates with long trafficked routes
Strict FOD (foreign object debris) control expectations
Scheduled maintenance windows that limit downtime
High-visibility line marking and demarcation requirements

Suitable Rayson systems

Rayson PrimeBond — Primers & bonding coats

PrimeBond epoxy

Rayson PrimeBond E20

Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.

Surfaces: concrete, cement screed
Role: primer

View product

PrimeBond epoxy

Rayson PrimeBond E25

Rayson PrimeBond E25 is a two-component, medium-viscosity, solvent-free epoxy bonding primer for dry or damp substrates — formulated to wet out and anchor to highly absorbent concrete, screed, asphalt and prepared metal.

Surfaces: concrete, cement screed
Role: primer

View product

Rayson LevelShield — Self-levelling floor systems

LevelShield epoxy

Rayson LevelShield SL120

Rayson LevelShield SL120 is a solvent-free, two-component, self-smoothing epoxy floor system that delivers a seamless wearing surface with medium to heavy chemical resistance and high mechanical strength.

Surfaces: concrete
Role: body coat

View product

Rayson PurScreed — Polyurethane-cement systems

PurScreed pu cement

Rayson PurScreed PC70

Rayson PurScreed PC70 is a four-part, water-based polyurethane-cement self-smoothing screed installed at 1.5–3 mm for medium to heavy-duty industrial floors with high chemical resistance.

Surfaces: concrete
Role: body coat

View product

Rayson UraForce — Polyurethane finishes

UraForce polyurethane

Rayson UraForce SB72

Rayson UraForce SB72 is a two-component, solvent-based polyurethane floor finish that holds its colour and high gloss under strong UV while resisting abrasion and a broad range of chemicals.

Surfaces: concrete
Role: finish

View product

Rayson SealForce — Polyurea waterproofing membranes

SealForce polyurea

Rayson SealForce SP200

Rayson SealForce SP200 is a hot spray-applied, 100% solids, rapid-curing pure polyurea membrane that forms a seamless, chemically resistant waterproof and protective lining on concrete and steel.

Surfaces: concrete, exposed structures, wet areas
Role: standalone

View product

SealForce polyurea

Rayson SealForce SP210

Rayson SealForce SP210 is a hot spray-applied, 100% solids pure polyurea membrane that forms a seamless, potable-grade waterproof lining on concrete and steel tanks, reservoirs and containment structures.

Surfaces: concrete, exposed structures, wet areas
Role: standalone

View product

Surface preparation considerations

Mechanical preparation (captive shot blasting or diamond grinding) to an open, sound profile
Moisture testing of slabs before application
Repair of joints and spalls with epoxy mortar before coating

Maintenance

Regular cleaning with neutral detergents; avoid aggressive solvent washing
Inspect high-traffic lanes and jacking points annually
Recoat wear lanes before the substrate is exposed

A recommended combination

Standard epoxy floor system

Mechanically prepare and vacuum the substrate
Prime with Rayson PrimeBond E20
Apply Rayson LevelShield SL120 self-levelling body coat

This is a typical build-up. The exact system depends on your conditions — confirm the specification with our technical team.

Technical documents

Technical data sheets for the products above are in the TDS library. For a specification tailored to your project, contact our technical team.

Rayson PrimeBond E20 — RY-TDS-101
Rayson PrimeBond E25 — RY-TDS-102
Rayson LevelShield SL120 — RY-TDS-401
Rayson PurScreed PC70 — RY-TDS-601
Rayson UraForce SB72 — RY-TDS-701
Rayson SealForce SP200 — RY-TDS-1103

When to contact technical support

Get in touch early if:

FOD-critical zones or specific cleanliness standards apply
Point-load and jacking-point details need engineering input
Slab moisture readings are borderline or unknown

Contact technical support

Not sure which system fits your project?

Tell us your surface, area and timeline — our Singapore technical team will recommend a practical system and price it fast.

Request a Quote WhatsApp +65 9821 9129 Call us